Suspension & Steering (A4)Câu 38 / 120
The purpose of a stabilizer (sway) bar is to:
a.Support the full weight of the vehicle
b.Absorb road shock like a shock absorber
c.Adjust ride height
d.Reduce body roll during cornering
Giải thích
The stabilizer bar links the left and right suspension to resist body lean when cornering, improving handling. Worn sway bar links or bushings produce a rattle or clunk over bumps. It does not carry ride height or primary spring load.
Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Technician A says a worn tie rod end can cause a toe change and tire wear. Technician B says it can cause excessive play in the steering and a failed alignment. Who is correct?
- Technician A says worn shocks or struts can cause the body to keep bouncing after a bump. Technician B says worn dampers have no effect on tire wear. Who is correct?
- Cupping or scalloping tire wear is most commonly associated with:
- Technician A says a side-to-side camber difference can cause a vehicle to pull toward the more positive side. Technician B says a defective tire can also cause a pull. Who is correct?
- In a power rack-and-pinion steering system, increased steering effort in only one direction most likely indicates:
- The included angle in an alignment is the sum of:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với ASE Automobile Certification Series (A1–A8) · Quy trình kiểm tra