Suspension & Steering (A4)Câu 41 / 120
The included angle in an alignment is the sum of:
a.Camber and steering axis inclination (SAI)
b.Caster and toe
c.Toe and camber
d.Caster and SAI
Giải thích
Included angle equals camber plus SAI and is useful for detecting bent spindles or struts, since SAI is built in and not adjustable. If included angle differs side to side, a component is likely bent. It is a diagnostic angle rather than an adjustable one.
Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- The purpose of a stabilizer (sway) bar is to:
- Technician A says a side-to-side camber difference can cause a vehicle to pull toward the more positive side. Technician B says a defective tire can also cause a pull. Who is correct?
- In a power rack-and-pinion steering system, increased steering effort in only one direction most likely indicates:
- A steering wheel that is off-center after an alignment, though the vehicle tracks straight, usually indicates:
- Technician A says tires should be rotated to promote even wear. Technician B says the tire's load index and speed rating should meet or exceed the vehicle's requirements. Who is correct?
- Technician A says a worn ball joint can cause clunking, wander, and uneven tire wear. Technician B says a load-carrying ball joint should be checked with its load removed per the procedure. Who is correct?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với ASE Automobile Certification Series (A1–A8) · Quy trình kiểm tra