Suspension & Steering (A4)Câu 39 / 120
Technician A says a side-to-side camber difference can cause a vehicle to pull toward the more positive side. Technician B says a defective tire can also cause a pull. Who is correct?
a.Technician A only
b.Technician B only
c.Both A and B
d.Neither A nor B
Giải thích
A cross-camber difference pulls the vehicle toward the more positive side, and a defective (conicity) tire can pull as well. Both technicians are correct. Compare cross-camber and cross-caster and swap tires side to side to isolate a tire pull.
Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Technician A says worn shocks or struts can cause the body to keep bouncing after a bump. Technician B says worn dampers have no effect on tire wear. Who is correct?
- Cupping or scalloping tire wear is most commonly associated with:
- The purpose of a stabilizer (sway) bar is to:
- In a power rack-and-pinion steering system, increased steering effort in only one direction most likely indicates:
- The included angle in an alignment is the sum of:
- A steering wheel that is off-center after an alignment, though the vehicle tracks straight, usually indicates:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với ASE Automobile Certification Series (A1–A8) · Quy trình kiểm tra