Core TradesCâu 113 / 700
An air barrier is installed in a building envelope MAINLY to:
a.Control uncontrolled air leakage through the assembly, saving energy and reducing moisture movement
b.Provide the finished interior surface
c.Carry structural loads
d.Act as the vapor retarder in all cases
Giải thích
An air barrier's job is to stop uncontrolled air infiltration/exfiltration through the envelope, cutting energy loss and limiting moisture carried by air. It is not the finished surface or a structural element, and although some materials do both, an air barrier is not by definition the vapor retarder.
Trích dẫn luật: 2025 CA Energy Code (Title 24, Part 6)Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Proper sequencing of roof components requires that water always flows over, not under, the layer below. Therefore drip edge at the eave and underlayment should be arranged so that:
- Continuous insulation (ci) is applied on the exterior side of the wall sheathing, over the studs, MAINLY to:
- CALCULATION: A wall assembly has three layers with R-values of R-4 (sheathing), R-13 (cavity), and R-0.68 (interior finish). Ignoring air films, what is the total nominal R-value?
- A water-resistive barrier (WRB) is being installed over wall sheathing. To shed water correctly, the horizontal laps must be arranged so that:
- Around a new window, the correct flashing sequence to integrate with the WRB is generally:
- Behind exterior stucco or siding, a drainage gap or weep provision is often required so that:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra