Core TradesCâu 137 / 700
When calculating outlet box fill, how are the equipment grounding conductors entering a box counted?
a.Each grounding conductor counts as one conductor
b.Each grounding conductor counts as two conductors
c.All grounding conductors together count as a single conductor volume
d.Grounding conductors are never counted
Giải thích
All equipment grounding conductors in a box collectively count as a single conductor volume allowance (based on the largest one present), because they occupy relatively little usable space. Counting each one separately would overstate the fill, and ignoring them entirely would understate it.
Trích dẫn luật: 2025 CA Electrical Code, Art. 314.16Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Under typical residential conditions, a copper 12 AWG conductor is generally protected at a MAXIMUM standard overcurrent rating of:
- For a 120/240-volt panelboard with no exposed live parts on the opposite side (Condition 1), what is the MINIMUM required clear working depth in front of the equipment?
- A concrete-encased electrode ('Ufer' ground) used as a grounding electrode must include at least how many feet of bare steel rebar or copper conductor encased in the footing?
- A standard plumbing trap must maintain a liquid seal with a depth in the range of:
- The primary purpose of a vent in a drain-waste-vent (DWV) system is to:
- A 3-inch-diameter horizontal drainage pipe should be installed at a MINIMUM slope of:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra