Core TradesCâu 140 / 700
A 3-inch-diameter horizontal drainage pipe should be installed at a MINIMUM slope of:
a.1/16 inch per foot
b.1/2 inch per foot
c.1/4 inch per foot
d.1/8 inch per foot
Giải thích
Drainage pipes 3 inches in diameter and larger may be sloped at a minimum of 1/8 inch per foot, which keeps solids in suspension without draining the water too fast. Pipes 2-1/2 inches and smaller need a steeper 1/4 inch per foot. 1/16 inch per foot is too flat to self-scour.
Trích dẫn luật: 2025 CA Plumbing Code §708.0Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- When calculating outlet box fill, how are the equipment grounding conductors entering a box counted?
- A standard plumbing trap must maintain a liquid seal with a depth in the range of:
- The primary purpose of a vent in a drain-waste-vent (DWV) system is to:
- The MOST reliable method to prevent backflow contamination of the potable water supply at a fixture is:
- In a long horizontal drainage line, cleanouts are generally required at intervals not exceeding approximately:
- The discharge pipe from a water heater's temperature-and-pressure (T&P) relief valve must:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra