Core TradesCâu 204 / 700
For an enclosed attic without a vapor retarder or balanced venting, the net free ventilating area must generally be at least what fraction of the vented attic floor area?
a.1/50
b.1/150
c.1/300
d.1/600
Giải thích
The baseline requirement is a net free vent area of at least 1/150 of the attic floor area. The 1/300 ratio is allowed only when specific conditions such as a vapor retarder or balanced high-and-low venting are met; 1/50 and 1/600 are not the standard code fractions.
Trích dẫn luật: 2025 CA Residential Code, R806 (Roof Ventilation)Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Standard three-tab asphalt shingles are typically installed with a common weather exposure of about:
- Proper flashing where a masonry chimney passes through a sloped roof generally consists of:
- A roof plane rises at a 5:12 slope over a horizontal run of 15 feet. What is the vertical rise?
- To completely fill the cavity of a nominal 2x6 wood-framed exterior wall, which batt insulation R-value is most typically specified?
- A blower-door test performed on a completed home measures PRIMARILY the building's:
- For window head flashing to work correctly with a water-resistive barrier, the barrier above the window must be lapped so that it:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra