Core TradesCâu 206 / 700
A blower-door test performed on a completed home measures PRIMARILY the building's:
a.Air leakage (envelope tightness)
b.Total insulation R-value
c.Duct system capacity
d.Window solar heat gain
Giải thích
A blower-door test pressurizes or depressurizes the house to quantify uncontrolled air leakage through the envelope. It does not directly measure insulation R-value, duct capacity, or window solar heat gain, which are evaluated by other methods.
Trích dẫn luật: 2025 CA Energy Code (Title 24, Part 6)Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A roof plane rises at a 5:12 slope over a horizontal run of 15 feet. What is the vertical rise?
- For an enclosed attic without a vapor retarder or balanced venting, the net free ventilating area must generally be at least what fraction of the vented attic floor area?
- To completely fill the cavity of a nominal 2x6 wood-framed exterior wall, which batt insulation R-value is most typically specified?
- For window head flashing to work correctly with a water-resistive barrier, the barrier above the window must be lapped so that it:
- A vapor retarder placed directly under a concrete slab-on-ground in habitable space is commonly required to be polyethylene sheeting with a MINIMUM thickness of:
- A radiant barrier installed in an attic reduces summer heat gain PRIMARILY by:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra