Finish TradesCâu 247 / 700
Fire-rated gypsum board used to achieve a one-hour wall assembly is commonly Type X. Its typical nominal thickness is:
a.1/4 inch
b.3/8 inch
c.1/2 inch
d.5/8 inch
Giải thích
Type X gypsum board is typically 5/8 inch thick, with a glass-fiber-reinforced core that resists fire long enough for rated assemblies. 1/4 and 3/8 inch are thin/utility boards, and 1/2 inch is standard (non-Type X) wall board.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A stone countertop overhangs a base cabinet to form an eating bar. When the unsupported overhang exceeds roughly the material's safe limit (often about 10 to 12 inches for typical stone), the installer should:
- Wall cabinets and grab-bar-ready walls rely on solid backing. When mounting heavy wall cabinets, the fasteners should be driven:
- During cabinet installation, a narrow gap remains between the last cabinet and a side wall or an appliance. The clean, professional way to close that gap is to use:
- On long, continuous drywall walls and ceilings, control (expansion) joints are added to relieve stress. A common guideline places control joints in walls at a MAXIMUM spacing of about:
- A wall that will receive a high-gloss enamel or be raked by strong sidelighting typically requires the highest drywall finish. Under the industry levels of gypsum finish, that is:
- To reduce ceiling sag when a water-based spray texture will be applied, code and industry guidance generally require which gypsum board for ceilings framed 16 inches on center?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra