Finish TradesCâu 246 / 700
During cabinet installation, a narrow gap remains between the last cabinet and a side wall or an appliance. The clean, professional way to close that gap is to use:
a.A bead of colored caulk only
b.A strip of the countertop material
c.A matching filler (filler strip) scribed and cut to fit
d.A piece of baseboard turned sideways
Giải thích
Cabinet lines are designed with filler strips to absorb dimensional gaps at walls and appliances; the filler is scribed and cut for a clean, matching fit. Caulk alone, countertop scraps, or sideways baseboard are improvised and look unprofessional.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A run of tall cabinets meets a wall that is not perfectly straight. To make the cabinet side fit tightly against the wavy wall, the finish carpenter should:
- A stone countertop overhangs a base cabinet to form an eating bar. When the unsupported overhang exceeds roughly the material's safe limit (often about 10 to 12 inches for typical stone), the installer should:
- Wall cabinets and grab-bar-ready walls rely on solid backing. When mounting heavy wall cabinets, the fasteners should be driven:
- Fire-rated gypsum board used to achieve a one-hour wall assembly is commonly Type X. Its typical nominal thickness is:
- On long, continuous drywall walls and ceilings, control (expansion) joints are added to relieve stress. A common guideline places control joints in walls at a MAXIMUM spacing of about:
- A wall that will receive a high-gloss enamel or be raked by strong sidelighting typically requires the highest drywall finish. Under the industry levels of gypsum finish, that is:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra