Finish TradesCâu 244 / 700
A stone countertop overhangs a base cabinet to form an eating bar. When the unsupported overhang exceeds roughly the material's safe limit (often about 10 to 12 inches for typical stone), the installer should:
a.Add corbels, brackets, or steel supports to carry the overhang
b.Rely on the adhesive to the cabinet alone
c.Make the overhang thinner by grinding
d.Nothing; stone never needs added support
Giải thích
Beyond the material's safe cantilever, an unsupported stone overhang can crack or tip, so brackets, corbels, or hidden steel supports are added to carry the load. Adhesive alone is inadequate, grinding it thinner weakens it further, and stone overhangs frequently do need support.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Before installing thin resilient flooring (such as luxury vinyl tile), the substrate flatness matters because the material is thin. A common flatness tolerance is no more than about 3/16 inch deviation in:
- Under the North American Architectural Woodwork Standards, three quality grades are defined. Between Premium and Custom, which grade is typically the LOWEST/most economical, used where appearance requirements are minimal?
- A run of tall cabinets meets a wall that is not perfectly straight. To make the cabinet side fit tightly against the wavy wall, the finish carpenter should:
- Wall cabinets and grab-bar-ready walls rely on solid backing. When mounting heavy wall cabinets, the fasteners should be driven:
- During cabinet installation, a narrow gap remains between the last cabinet and a side wall or an appliance. The clean, professional way to close that gap is to use:
- Fire-rated gypsum board used to achieve a one-hour wall assembly is commonly Type X. Its typical nominal thickness is:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra