Finish TradesCâu 252 / 700
On gypsum board joints, paper tape and mesh (self-adhesive fiberglass) tape behave differently. A key reason many finishers use PAPER tape at inside corners is that:
a.Paper tape has a crease and higher strength that resists cracking at corners
b.Paper tape needs no joint compound
c.Mesh tape is stronger than paper in every application
d.Paper tape is only for exterior use
Giải thích
Paper tape folds cleanly at its center crease and has higher tensile strength, making it preferred at inside corners where movement tends to crack joints; mesh is convenient on flats but weaker and more crack-prone at corners. Paper tape still needs compound, mesh is not universally stronger, and paper tape is an interior finishing product.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A wall that will receive a high-gloss enamel or be raked by strong sidelighting typically requires the highest drywall finish. Under the industry levels of gypsum finish, that is:
- To reduce ceiling sag when a water-based spray texture will be applied, code and industry guidance generally require which gypsum board for ceilings framed 16 inches on center?
- Which combination of assembly changes will BEST raise the Sound Transmission Class (STC) of an interior partition?
- When installing a window in an exterior wall with a weather-resistive barrier, the flashing should be lapped so that:
- A below-grade bedroom uses a window well to meet emergency escape requirements. The window well must generally provide a minimum horizontal area of at least ____, with a minimum projection and width of 36 inches.
- Glazing that is adjacent to a door and within a certain arc of the closed door edge generally must be safety glazing. That arc is measured within a ____ radius of the door in the closed position and up to 60 inches above the floor.
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra