Framing & StructuralCâu 378 / 700
A gable roof has a total run of 12 feet (horizontal from wall to ridge) and a slope of 6:12. Ignoring ridge and overhang, what is the approximate line length of a common rafter along the slope?
a.About 13 feet 5 inches
b.About 12 feet 0 inches
c.About 15 feet 0 inches
d.About 6 feet 0 inches
Giải thích
Rafter line length equals run times the unit-length factor. For a 6:12 slope the diagonal per 12 units of run is the square root of (12² + 6²) = 13.416 units, a factor of about 1.118. Multiply 12 ft run by 1.118 to get roughly 13.42 ft, or about 13 ft 5 in. 12 ft ignores the slope; 15 ft overshoots; 6 ft is the rise, not the rafter length.
Trích dẫn luật: 2025 CA Residential Code §R802Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A spiral stairway is permitted in a dwelling under special rules. Which requirement is characteristic of a code-compliant spiral stair?
- For a conventionally framed one-story dwelling using 2x4 studs, what is the MAXIMUM on-center spacing generally permitted for load-bearing wall studs supporting a roof and ceiling only?
- When installing tongue-and-groove wood structural panel subflooring, which practice BEST reduces squeaks and improves diaphragm performance?
- Under the residential code, what is the MAXIMUM permitted riser height for a stairway serving a dwelling?
- For a dwelling stairway, what is the MINIMUM tread depth (run) required, measured horizontally between the leading edges of adjacent treads?
- Guards on open sides of walking surfaces in a dwelling must be at least what height above the walking surface or, for stairs, the line connecting the tread nosings?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra