Framing & StructuralCâu 456 / 700
A roof is designed with a 4:12 slope (4 inches of vertical rise for every 12 inches of horizontal run). If the horizontal run from the wall to the ridge is 15 feet, what is the total vertical rise?
a.3 feet
b.4 feet
c.5 feet
d.6 feet
Giải thích
Rise equals run times the slope ratio: 15 feet x (4/12) = 15 x 0.333 = 5 feet. The other answers come from applying the wrong ratio or misplacing the run and rise in the slope fraction.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- On an open stair with a guard, the triangular opening formed by the tread, riser, and bottom rail is limited so that what size sphere cannot pass through?
- In conventional wall framing, where two members of a double top plate are spliced (joints occur), the upper and lower plate joints must be offset by at least how much?
- Behind most exterior siding on a wood-framed wall, the code requires a water-resistive barrier equivalent to at least what?
- When notching or boring a solid-sawn floor joist for a pipe, which limitation applies to protect the joist's strength?
- Fasteners and metal connectors that contact preservative (pressure) treated deck lumber must have what property to prevent premature failure?
- In braced-wall and shear-wall construction resisting seismic loads, anchor bolts at the sill plate are commonly required to have what added component for load transfer?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra