Framing & StructuralCâu 455 / 700
Behind most exterior siding on a wood-framed wall, the code requires a water-resistive barrier equivalent to at least what?
a.One layer of No. 15 asphalt felt or an approved equivalent
b.Three layers of building paper
c.A continuous rigid steel sheet
d.No barrier as long as the siding laps are caulked
Giải thích
The minimum water-resistive barrier is one layer of No. 15 asphalt felt or an approved equivalent house wrap, lapped to shed water. Three layers exceed the general minimum, a steel sheet is not a required WRB, and caulked laps alone do not replace a continuous barrier behind the siding.
Trích dẫn luật: 2025 CA Residential Code §R703.2Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- On a stairway that turns using winder treads, what is the MINIMUM tread depth measured at the walk line, and the MINIMUM depth at any point of the narrow end?
- On an open stair with a guard, the triangular opening formed by the tread, riser, and bottom rail is limited so that what size sphere cannot pass through?
- In conventional wall framing, where two members of a double top plate are spliced (joints occur), the upper and lower plate joints must be offset by at least how much?
- A roof is designed with a 4:12 slope (4 inches of vertical rise for every 12 inches of horizontal run). If the horizontal run from the wall to the ridge is 15 feet, what is the total vertical rise?
- When notching or boring a solid-sawn floor joist for a pipe, which limitation applies to protect the joist's strength?
- Fasteners and metal connectors that contact preservative (pressure) treated deck lumber must have what property to prevent premature failure?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra