SafetyCâu 572 / 700
A temporary traffic control zone is being set up. What is the PRIMARY purpose of the advance warning area with signs placed before the work?
a.To decorate the work zone
b.To inform approaching drivers of conditions ahead so they can slow and prepare
c.To store equipment and materials
d.To mark the exact end of the project
Giải thích
The advance warning area uses signs ahead of the work to tell drivers what to expect, giving them time to reduce speed, change lanes, or stop before reaching the activity area. Option a trivializes a safety function. Option c misuses the area and can create hazards. Option d confuses it with the termination area. Clear advance warning is the first line of defense in a temporary traffic control zone.
Trích dẫn luật: California MUTCD Part 6Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Noise monitoring shows workers are exposed to an average of 88 dBA over an 8-hour shift. Beyond providing hearing protection, what is the employer generally required to establish?
- On a 55 mph roadway you must close a lane and shift traffic 12 feet. Using the merging taper formula L equals W times S for speeds of 45 mph and above (L in feet, W in feet, S in mph), what is the MINIMUM taper length?
- A flagger controls traffic at a work zone on a city street. Which practice BEST follows California MUTCD flagging guidance?
- A large earthwork site keeps tracking mud onto the public street. Which best management practice (BMP) BEST addresses this under the site's storm water plan?
- Concrete trucks need a place to rinse out their chutes on site. What is the BEST practice to protect the environment?
- Drums of fuel and solvents are stored on a jobsite. What is the BEST practice to prevent spills from reaching soil or storm drains?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra