Planning & EstimatingCâu 627 / 700
Which statement BEST distinguishes shop drawings, product data, and samples as types of submittals?
a.They are all the same document under three different names.
b.Shop drawings are manufacturer catalog sheets, while product data are hand-drawn field sketches.
c.Samples are the contract drawings, and shop drawings are the written specifications.
d.Shop drawings are contractor/fabricator-prepared drawings of specific items; product data are manufacturer catalog cut sheets; samples are physical examples of the actual material.
Giải thích
Correct: these are three submittal types that demonstrate conformance with the design. Shop drawings are detailed fabrication/installation drawings prepared for the project; product data are the manufacturer's printed literature; samples are physical pieces (e.g., tile, finish chips). The other options confuse or swap these categories.
Luyện miễn phí toàn bộ 700 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What is the PRIMARY purpose of value engineering on a construction project?
- What typically triggers a change order, and how is it documented?
- When should a contractor issue a Request for Information (RFI)?
- Under CSI MasterFormat, cast-in-place structural concrete work is specified under which division?
- Under CSI MasterFormat, concrete masonry unit (CMU) and brick work fall under which division?
- Structural steel framing and steel joists are specified under which CSI MasterFormat division?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB General Building (B) Trade Examination · Quy trình kiểm tra