Thiết bị & Hệ thốngCâu 329 / 521
Under the busbar interconnection rule, the sum of the main utility overcurrent device plus the inverter (power-production) overcurrent device generally may not exceed what percent of the busbar rating?
a.120% of the busbar ampacity
b.100% of the busbar ampacity
c.150% of the busbar ampacity
d.80% of the busbar ampacity
Giải thích
Section 705.12(B)(3) allows the sum of the ampere ratings of the main supply overcurrent device and the power-production (inverter) overcurrent device to be up to 120 percent of the busbar rating when the inverter breaker is at the opposite end from the main. Exceeding 120 percent would risk overloading the busbar.
Trích dẫn luật: 2023 NEC §705.12Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A storage-battery emergency source must be capable of maintaining the total emergency load for what minimum time and voltage?
- A PV system disconnecting means must be installed how?
- For a one- or two-family dwelling, what is the maximum permitted PV system DC voltage?
- The DC PV disconnect label must display what information?
- A power-limited fire alarm (PLFA) power source is limited to what maximum output?
- How must fire alarm circuit cables be installed and supported?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra