Thiết bị & Hệ thốngCâu 331 / 521
A power-limited fire alarm (PLFA) power source is limited to what maximum output?
a.50 VA
b.100 VA
c.250 VA
d.1000 VA
Giải thích
Section 760.121 limits a PLFA power source to the output of a listed Class 3 supply not exceeding 100 volt-amperes. Sources exceeding these limits are treated as non-power-limited fire alarm (NPLFA) circuits and must follow Chapter 3 wiring methods.
Trích dẫn luật: 2023 NEC §760.121Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- For a one- or two-family dwelling, what is the maximum permitted PV system DC voltage?
- Under the busbar interconnection rule, the sum of the main utility overcurrent device plus the inverter (power-production) overcurrent device generally may not exceed what percent of the busbar rating?
- The DC PV disconnect label must display what information?
- How must fire alarm circuit cables be installed and supported?
- What best characterizes a Class 2 circuit?
- How must Class 2 conductors generally be separated from electric light and power conductors?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra