Lập kế hoạch & Dự toánCâu 366 / 521
A floor plan is drawn at a scale of 1/4 in = 1 ft. A wall measures 3 in on the drawing. What is its actual length?
a.3 ft
b.6 ft
c.12 ft
d.48 ft
Giải thích
At 1/4 in = 1 ft, each inch equals 4 ft, so 3 in × 4 ft/in = 12 ft. Reading the drawing dimension directly (3 ft) or misapplying the scale gives the other values.
Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Using the optional method, a dwelling's other loads (excluding heating/AC) total 30 kVA. What is the demand after applying the optional-method demand factors?
- On an electrical floor plan, the switch symbol marked with a subscript 3 (S3) indicates what device?
- How often is a new edition of the National Electrical Code, on which the California Electrical Code is based, normally published?
- Which drawing best shows the vertical arrangement of the service and feeders as they run between floors of a multistory building?
- During the permit process, when is the rough (rough-in) electrical inspection normally performed?
- The optional calculation method of 220.82 may be used for a dwelling served by a single 120/240 V feeder or service rated at least how many amperes?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra