Lập kế hoạch & Dự toánCâu 377 / 521
In electrical estimating, what does a labor unit represent?
a.The purchase cost of the material
b.The estimated labor-hours to install one unit of material
c.The contractor's profit margin
d.The permit fee for the job
Giải thích
A labor unit is the estimated time (usually in hours or hundredths of an hour) needed to install a single item such as a receptacle or a foot of conduit. Multiplying labor units by quantities gives total labor hours, which is separate from material cost, profit, or permits.
Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Which loads may be added to the general lighting load and then subjected together to the 220.42 general-lighting demand factors?
- A dwelling has 9,000 VA of electric heating and 6,000 VA of air conditioning that cannot operate at the same time. What value is included in the service calculation?
- A household range has a calculated demand of 8,000 VA. What maximum value may be used for the neutral (grounded) feeder load for this range?
- In the bidding process, what is a material takeoff?
- Where is the California Electrical Code officially published within the California Code of Regulations?
- Which set of California regulations contains the worker-safety rules (Cal/OSHA) that apply to electricians on the job?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra