An toànCâu 461 / 521
On many California jobsites, which OSHA safety training is typically expected for supervisors versus entry-level workers?
a.OSHA 10 for supervisors and OSHA 30 for the workers
b.Both groups take an OSHA 4-hour course
c.OSHA 30 for supervisors/those with safety responsibility and OSHA 10 for entry-level workers
d.No safety training course exists for construction
Giải thích
The OSHA 30-hour course is aimed at supervisors and workers with safety responsibility, while the OSHA 10-hour course targets entry-level workers. Reversing the two, an imaginary 4-hour course, or claiming no course exists all misstate the standard training structure.
Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Before entering a permit-required confined space, the atmosphere should be tested in what order?
- A normal, safe breathable oxygen concentration in a confined space is approximately:
- A permit-required confined space entry requires an attendant who:
- The OSHA 10-hour Construction course primarily covers:
- Electrocution is one of OSHA's construction 'Focus Four' hazards. The other three are:
- An unqualified worker must walk past an open 480V panel with exposed live parts to reach a work area. What must happen?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra