An toànCâu 462 / 521
The OSHA 10-hour Construction course primarily covers:
a.How to pass the C-10 licensing exam
b.Advanced electrical load calculations
c.Recognition, avoidance, and prevention of common jobsite hazards, including the 'Focus Four' (falls, electrocution, struck-by, caught-in/between)
d.How to calculate union dues
Giải thích
OSHA 10 teaches workers to recognize, avoid, and prevent common construction hazards, emphasizing the Focus Four. It is a safety awareness course, not licensing exam prep, load-calculation training, or a class on union administration.
Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A normal, safe breathable oxygen concentration in a confined space is approximately:
- A permit-required confined space entry requires an attendant who:
- On many California jobsites, which OSHA safety training is typically expected for supervisors versus entry-level workers?
- Electrocution is one of OSHA's construction 'Focus Four' hazards. The other three are:
- An unqualified worker must walk past an open 480V panel with exposed live parts to reach a work area. What must happen?
- An arc-flash hazard warning label applied to equipment should list information such as:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra