Kiểm tra & Khắc phục sự cốCâu 495 / 521
A newly connected three-phase motor runs backward. What is the standard corrective action?
a.Reverse all three line leads at the motor
b.Add a phase-shifting capacitor to one leg
c.Interchange any two of the three line leads
d.Increase the supply voltage by 10%
Giải thích
Swapping any two of the three phase conductors reverses the rotation of the motor's rotating magnetic field, so the motor turns the correct way. Reversing all three (a) leaves rotation unchanged. A capacitor (b) and higher voltage (d) do not change phase sequence.
Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Two 20 ohm resistors are connected in parallel. What total resistance will an ohmmeter read?
- The 2023 NEC added a requirement on how terminations must be tightened when the manufacturer provides a torque value. What does it require?
- A terminal on a device is marked 'CU' only. What does this mean for terminations?
- A receptacle reads 120 V hot-to-neutral but 0 V hot-to-ground. Neutral-to-ground also reads 0 V and the ground pin has no continuity to the panel. What is the fault?
- Testing a suspected conductor with an ohmmeter, you read 'OL' (over-limit / infinite). What does this indicate about the conductor?
- In a properly bonded system, what is the primary purpose of the equipment grounding conductor during a line-to-enclosure (ground) fault?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra