Dịch vụ & Phân phốiCâu 74 / 521
In general, conductors may be connected in parallel (electrically joined at both ends) only where the individual conductors are:
a.2 AWG and larger
b.4 AWG and larger
c.1/0 AWG and larger
d.250 kcmil and larger
Giải thích
Per 310.10(G), paralleling of ungrounded and grounded conductors is generally permitted only in sizes 1/0 AWG and larger. The smaller sizes are not allowed under the general rule, and requiring 250 kcmil would be more restrictive than the code.
Trích dẫn luật: 2023 NEC §310.10(G)Luyện miễn phí toàn bộ 521 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- At other than dwelling units, service equipment must be legibly field-marked with:
- The interrupting rating of an overcurrent device must be:
- The short-circuit current rating (SCCR) of equipment such as a panelboard means the equipment can:
- When conductors are installed in parallel, the paralleled conductors of each phase, neutral, or grounded circuit conductor must:
- A feeder has a maximum unbalanced (neutral) load of 250 A. Applying the neutral demand provisions, the minimum neutral conductor ampacity is:
- For a 200 A single-phase dwelling service, the minimum aluminum service-entrance conductor permitted by the dwelling service conductor provisions is:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-10 Electrical Trade Examination · Quy trình kiểm tra