Load & DesignCâu 11 / 110
In California, plans for new HVAC systems typically must demonstrate compliance with which energy standard?
a.The National Electrical Code
b.Title 24, Part 6 energy efficiency standards
c.The Uniform Plumbing Code
d.The Americans with Disabilities Act
Giải thích
Title 24, Part 6 sets California's building energy efficiency standards, including HVAC equipment efficiency, duct sealing, and refrigerant charge verification. New and altered systems generally must show compliance through prescriptive or performance methods. Documentation is submitted with the permit application.
Trích dẫn luật: California Energy Code (Title 24)Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- After a Manual J load is calculated, which ACCA procedure is used to select the specific equipment model?
- Oversizing a residential air conditioner most commonly leads to which problem?
- Which factor increases a building's cooling load the most on a hot afternoon?
- Under the California Mechanical Code, when is a permit generally required for HVAC work?
- What is the primary purpose of a Manual J block load versus a room-by-room load?
- If a home has a calculated cooling load of 30,000 BTU/hr, what nominal equipment size is the closest match?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-20 Warm-Air HVAC Trade Exam · Quy trình kiểm tra