InstallationCâu 31 / 110
What is the purpose of maintaining manufacturer-specified clearances to combustibles around a furnace?
a.To improve airflow measurement
b.To prevent overheating of nearby combustible materials and reduce fire risk
c.To lower the refrigerant charge
d.To allow duct expansion only
Giải thích
Listed clearances to combustibles ensure the heat radiating from the furnace and vent does not ignite nearby wood, drywall paper, or stored materials. These clearances are set by the appliance listing and the CMC. Maintaining them and service access is required for safe operation.
Trích dẫn luật: 2022 California Mechanical Code (CMC)Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A secondary condensate drain pan or float switch is typically required when an air handler is installed where?
- When brazing refrigerant copper line sets, dry nitrogen is flowed through the tubing to accomplish what?
- Refrigerant suction lines on a split system are typically insulated for what reason?
- A properly installed refrigerant line set should have the liquid line and suction line sized according to what?
- On a long vertical suction riser, what feature helps ensure compressor oil returns properly?
- In a split-system heat pump, the outdoor coil functions as the condenser during which mode?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-20 Warm-Air HVAC Trade Exam · Quy trình kiểm tra