Cấp nước & Phân phốiCâu 1 / 360
A single-family dwelling has a total demand of 22 water supply fixture units (WSFU). Using the code sizing tables, which is the smallest nominal water service pipe size that is generally acceptable for a building water service?
a.3/4 inch
b.1/2 inch
c.3/8 inch
d.1/4 inch
Giải thích
The code establishes 3/4 inch as the minimum nominal size for a building water service serving a typical dwelling, and 22 WSFU falls within its capacity for normal developed lengths and pressure. A 1/2 inch, 3/8 inch, or 1/4 inch service is below the allowed minimum for a building supply and would not be code-compliant.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §610.0Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- You measure a static street pressure of 95 psi at a new residence. According to the code, what is required on the water supply?
- An air gap is used to protect a potable water outlet discharging into a fixture. What is the minimum required vertical air gap relative to the effective opening of the supply?
- A commercial irrigation system injects fertilizer chemicals into the line and operates under continuous pressure with potential backpressure. Which backflow assembly is required for this high-hazard cross-connection?
- An atmospheric vacuum breaker (AVB) is installed to protect a hose connection. What installation condition must be satisfied for an AVB to be used correctly?
- A plumber connects PEX tubing to a residential water heater. What does the code require at the hot-water outlet connection?
- You are supporting horizontal 1-inch copper water tube. Per the code hanger and support spacing table, what is the maximum horizontal spacing between supports for copper tube 1-1/2 inch and smaller?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra