Thiết bị & Bình nước nóngCâu 218 / 360
A thermal expansion tank installed on a water heater system must be:
a.supported so its weight is not carried by the connecting piping
b.filled completely with water
c.installed only on the hot outlet
d.left unpressurized
Giải thích
An expansion tank, especially when full of water, is heavy and must be independently supported so its weight does not stress or break the piping. The air side is precharged to match system pressure. Proper support and precharge let the tank absorb thermal expansion reliably.
Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Which of the following is prohibited between a water heater and its T&P relief valve?
- A water heater must be installed so that:
- The temperature-sensing element of a water heater T&P relief valve must be located so that it senses:
- Water hammer arrestors are installed on a water distribution system primarily to:
- An outdoor hose bibb (sillcock) must be protected against backflow by:
- Each fixture supply to a lavatory or water closet is commonly fitted with an angle stop primarily to:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra