Đường ống gaCâu 259 / 360
Why is it important to know that propane (LP) vapor is heavier than air when installing gas piping and appliances?
a.Because propane rises and collects at the ceiling
b.Because a propane leak settles into low areas such as pits, basements, and floor level where it can accumulate
c.Because propane is lighter than air like natural gas
d.Because propane cannot leak
Giải thích
Propane vapor is heavier than air, so a leak sinks and pools in low spots such as pits, floor drains, crawl spaces, and basements rather than dispersing upward. That is why LP appliances and detection are handled differently than natural gas, which is lighter than air and rises. Ventilation and leak-detection strategy must match the fuel's density.
Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A line pressure regulator on a 2 psi system has a vent limiter or vent connection. Where must a regulator vent generally terminate?
- When installing CSST, which document must be followed for support spacing, fittings, bonding, and physical protection?
- Which test medium is acceptable for pressure-testing gas piping?
- Compared with propane, how does natural gas behave if it leaks indoors?
- A sizing table (natural gas) shows 1/2-inch pipe carries 92 cfh and 3/4-inch pipe carries 190 cfh at the governing length. A section supplies a 40,000 BTU/hr wall furnace plus a 45,000 BTU/hr water heater. What is the smallest size that works?
- Which installation practice for a flexible appliance connector is correct?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra