Lập kế hoạch & Dự toánCâu 274 / 360
For most commercial plumbing jobs, who is normally responsible for obtaining the plumbing permit before work starts?
a.The material supplier
b.The utility company
c.The licensed contractor performing the work
d.The building inspector
Giải thích
The licensed contractor doing the installation typically pulls the permit and is accountable for the work meeting code. Pulling a permit under the proper license also ties liability to the responsible party. Planning must include permit lead time so inspections can be scheduled on time.
Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- On plumbing plans, piping that runs below the floor slab or underground is most commonly drawn using which line type?
- During construction the rough-in (rough) plumbing inspection is generally performed at what point?
- For a slab-on-grade house, which sequence of plumbing inspections is correct?
- You are doing a material takeoff from an isometric of a bathroom group. The riser drops through one floor and makes three horizontal offsets, each requiring a pair of 90° bends. How many 90° elbows should you count for those offsets alone?
- You are laying out a 2-inch horizontal drainage pipe. What minimum slope does the CPC require for a pipe this size?
- When planning cleanout locations on a long horizontal building drain, what is the maximum spacing between cleanouts under the CPC?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra