Lập kế hoạch & Dự toánCâu 276 / 360
You are laying out a 2-inch horizontal drainage pipe. What minimum slope does the CPC require for a pipe this size?
a.1/4 inch per foot
b.1/16 inch per foot
c.1 inch per foot
d.1/2 inch per foot
Giải thích
Under CPC Table 708.1, horizontal drainage piping 2½ inches and smaller must slope at least 1/4 inch per foot (about 2%). Larger pipe may be permitted at 1/8 inch per foot. Getting the fall right on the plan prevents solids from settling and clogging the line.
Trích dẫn luật: CPC 708.1Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- For a slab-on-grade house, which sequence of plumbing inspections is correct?
- For most commercial plumbing jobs, who is normally responsible for obtaining the plumbing permit before work starts?
- You are doing a material takeoff from an isometric of a bathroom group. The riser drops through one floor and makes three horizontal offsets, each requiring a pair of 90° bends. How many 90° elbows should you count for those offsets alone?
- When planning cleanout locations on a long horizontal building drain, what is the maximum spacing between cleanouts under the CPC?
- When planning backfill over a drainage pipe laid in a trench, what is the correct practice under the CPC?
- In estimating, a "labor unit" for a plumbing task usually represents what?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra