Lập kế hoạch & Dự toánCâu 279 / 360
In estimating, a "labor unit" for a plumbing task usually represents what?
a.The total dollar price charged to the customer
b.The weight of the fitting in pounds
c.The number of fittings in a box
d.The estimated worker-hours to install one item under normal conditions
Giải thích
A labor unit is the standard time, usually in worker-hours, to install a given item such as a fixture or fitting under normal job conditions. Estimators multiply counted quantities by labor units to build the labor portion of the bid. Adjustment factors are then applied for job difficulty, height, or congestion.
Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- You are laying out a 2-inch horizontal drainage pipe. What minimum slope does the CPC require for a pipe this size?
- When planning cleanout locations on a long horizontal building drain, what is the maximum spacing between cleanouts under the CPC?
- When planning backfill over a drainage pipe laid in a trench, what is the correct practice under the CPC?
- On a plumbing riser diagram, what does the drawing primarily show?
- A plan symbol showing a small circle with a bisecting line and the note "FD" most likely indicates what?
- The plan scale is 1/4 inch = 1 foot. A water line measures 5 inches on the drawing. What is the actual pipe length?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra