Lập kế hoạch & Dự toánCâu 301 / 360
What is the main reason to prepare a written material takeoff before ordering pipe and fittings for a job?
a.To satisfy the painter
b.To order accurate quantities so the crew avoids shortages and costly return trips
c.To replace the need for any plans
d.To set the water pressure
Giải thích
A written takeoff converts the drawings into a counted list of pipe, fittings, valves, and fixtures so the order matches the job. Accurate quantities prevent both shortages that stall the crew and over-ordering that ties up money. It also becomes the basis for the material portion of the estimate.
Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A plan note reads "See detail 3/P-4." What does this callout tell the installer?
- Before excavating a trench for underground plumbing on a commercial site, which coordination step is most important for safety and to avoid utility strikes?
- When sizing a building sewer during layout, the required size is based primarily on what?
- When laying out vent piping, the CPC requires vents to be graded and connected so they do what?
- You take off 220 linear feet of pipe from the plans and add a 10% waste allowance. Pipe is stocked in 20-foot lengths. How many 20-foot lengths should you order?
- During planning, what is the purpose of a plumbing "plot" or "site" plan as opposed to the floor plan?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra