Lập kế hoạch & Dự toánCâu 302 / 360
When laying out vent piping, the CPC requires vents to be graded and connected so they do what?
a.Trap water at every low point
b.Run perfectly level with no slope
c.Drain back by gravity to a soil or waste pipe so condensate cannot collect
d.Terminate below the flood-level rim of a fixture
Giải thích
CPC 906.0 requires vent pipes to be graded and connected to drain back by gravity to a soil or waste pipe, preventing condensate or rainwater from collecting and blocking the vent. A vent that sags and holds water can lose its function. Planning the vent slope and connection points keeps the venting system self-draining.
Trích dẫn luật: CPC 906.0Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Before excavating a trench for underground plumbing on a commercial site, which coordination step is most important for safety and to avoid utility strikes?
- When sizing a building sewer during layout, the required size is based primarily on what?
- What is the main reason to prepare a written material takeoff before ordering pipe and fittings for a job?
- You take off 220 linear feet of pipe from the plans and add a 10% waste allowance. Pipe is stocked in 20-foot lengths. How many 20-foot lengths should you order?
- During planning, what is the purpose of a plumbing "plot" or "site" plan as opposed to the floor plan?
- When exactly is the final plumbing inspection normally performed?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra