Cấp nước & Phân phốiCâu 35 / 360
Which characteristic makes CPVC acceptable for hot water distribution where standard PVC is not?
a.CPVC is metallic
b.CPVC is rated only for drainage
c.CPVC is chlorinated to withstand higher temperatures suitable for hot water
d.CPVC has a lower temperature rating than PVC
Giải thích
CPVC is chlorinated PVC with a higher temperature rating, making it suitable for hot water distribution, whereas standard PVC is not rated for hot potable water. CPVC is not metallic, is not limited to drainage, and has a higher, not lower, temperature rating than PVC.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §604.1Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- For vertical copper water tube, how must risers be supported according to the support requirements?
- A commercial building connects to a boiler that uses chemical additives and is served from the potable main. What premise-isolation protection does the code generally require at the service?
- A fixture requires a minimum flow (residual) pressure of 8 psi to operate correctly. During peak demand your calculation shows only 5 psi available at that fixture. What is the correct interpretation?
- A pressure-reducing valve is set to deliver 65 psi downstream from a 110 psi street pressure. On a closed system, what additional device is commonly required to accompany the PRV?
- What is the essential difference between back-siphonage and backpressure backflow?
- A meter and service are being sized. The peak demand is 24 gpm at a required 20 psi residual. Available static street pressure is 55 psi, and the total pressure loss budget (meter, elevation, friction, fittings) is calculated at 40 psi. Is the design feasible?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra