Thoát nước, Nước thải & Thông hơiCâu 86 / 360
Horizontal vent piping must be graded so that it:
a.Runs perfectly level
b.Drains any condensate back to the drainage pipe by gravity
c.Slopes away from the drainage system
d.Is installed only vertically
Giải thích
Horizontal vent pipes must maintain a slope back toward the drainage piping so condensate and any moisture drain back by gravity and do not pool inside the vent. A level or reverse-sloped vent allows water to collect and block airflow. Vents are not restricted to vertical runs.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §905.0Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A single wet vent may serve fixtures within a maximum of how many bathroom groups?
- A circuit vent may serve a battery of not more than how many fixtures?
- A combination waste and vent system is typically used for:
- A vent must rise vertically to a point above the flood-level rim of the highest fixture served before it may offset horizontally, by at least:
- What is the minimum diameter permitted for any vent pipe?
- A horizontal branch serves two lavatories (1 DFU each), one kitchen sink (2 DFU), and one bathtub (2 DFU). What is the total DFU and minimum branch size?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra