Thoát nước, Nước thải & Thông hơiCâu 90 / 360
A horizontal drain run is 80 feet long at 1/4 inch per foot slope. What is the total fall over the run?
a.10 inches
b.20 inches
c.40 inches
d.16 inches
Giải thích
Total fall equals slope times length: 80 feet times 1/4 inch per foot = 20 inches. Ten inches would be the fall at 1/8 inch per foot, and 40 inches would require 1/2 inch per foot. Sixteen inches does not match any standard slope for this run.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §708.1Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A vent must rise vertically to a point above the flood-level rim of the highest fixture served before it may offset horizontally, by at least:
- What is the minimum diameter permitted for any vent pipe?
- A horizontal branch serves two lavatories (1 DFU each), one kitchen sink (2 DFU), and one bathtub (2 DFU). What is the total DFU and minimum branch size?
- A 3 inch drain runs 48 feet at the minimum slope of 1/8 inch per foot. What is the total fall?
- Over its length, the total fall of a trap arm must not exceed:
- For a 1-1/4 inch trap arm, the maximum developed length to the vent is:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra