Thoát nước, Nước thải & Thông hơiCâu 96 / 360
A cleanout is required where an aggregate horizontal change of direction in a drainage line exceeds:
a.45 degrees
b.90 degrees
c.22-1/2 degrees
d.135 degrees
Giải thích
A cleanout is required where the aggregate horizontal change of direction exceeds 135 degrees, because sharp cumulative bends collect debris and are hard to rod through. Smaller thresholds such as 45 or 90 degrees would require far more cleanouts than the code intends, and 22-1/2 degrees is a single-fitting angle, not the aggregate limit.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §707.4Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- For a 1-1/4 inch trap arm, the maximum developed length to the vent is:
- For a 4 inch trap arm, the maximum developed length to the vent is:
- A cleanout is required at:
- A cleanout (often a two-way cleanout) is required at:
- The drainage fixture unit (DFU) value of a private bathtub is:
- The DFU value assigned to a single lavatory is:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra