Thoát nước, Nước thải & Thông hơiCâu 94 / 360
For a 4 inch trap arm, the maximum developed length to the vent is:
a.6 feet
b.10 feet
c.8 feet
d.12 feet
Giải thích
A 4 inch trap arm may run a maximum developed length of 10 feet to its vent, the longest listed. Six feet is the limit for a 3 inch arm. Eight and twelve feet are not the listed maximum for a 4 inch trap arm.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §1002.2Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A 3 inch drain runs 48 feet at the minimum slope of 1/8 inch per foot. What is the total fall?
- Over its length, the total fall of a trap arm must not exceed:
- For a 1-1/4 inch trap arm, the maximum developed length to the vent is:
- A cleanout is required at:
- A cleanout is required where an aggregate horizontal change of direction in a drainage line exceeds:
- A cleanout (often a two-way cleanout) is required at:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra