An toànCâu 1274 / 1605
For a non-self-supporting (leaning) portable ladder, what is the proper setup angle?
a.A 1:1 ratio
b.As steep as possible against the wall
c.Flat, resting on two supports
d.About a 4:1 ratio — base placed 1 foot out for every 4 feet of working height
Giải thích
1926.1053(b)(5)(i) requires leaning ladders to be set at about a 4:1 pitch — the horizontal distance from the base to the support is roughly one-quarter of the ladder's working length.
Trích dẫn luật: 29 CFR 1926.1053(b)(5)Luyện miễn phí toàn bộ 1605 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- When a scaffold platform is more than 2 feet above or below a point of access, what must be provided?
- Supported scaffold poles, legs, or uprights must be plumb and braced, and generally must rest on:
- When a portable ladder is used to access an upper landing surface, the side rails must extend at least how far above the landing?
- While climbing or working on a ladder, an employee must:
- The top step or top cap of a stepladder should be used how?
- A portable ladder is found with a broken rung and a cracked side rail. The correct action is to:
Cập nhật gần nhất: · quy trình kiểm tra
Sen Lin, Người sáng lập PrepPass · Đối chiếu với California CSLB Contractor License Law & Business Exam · Quy trình kiểm tra
Người kiểm duyệt Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — kiểm tra)