An toànCâu 1275 / 1605
While climbing or working on a ladder, an employee must:
a.Carry heavy tools by hand
b.Not carry loads that could cause loss of balance
c.Slide down the side rails
d.Face away from the ladder
Giải thích
1926.1053(b)(22) prohibits carrying loads on a ladder that could cause the worker to lose balance and fall. Workers should face the ladder and maintain three points of contact.
Trích dẫn luật: 29 CFR 1926.1053(b)(22)Luyện miễn phí toàn bộ 1605 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Supported scaffold poles, legs, or uprights must be plumb and braced, and generally must rest on:
- When a portable ladder is used to access an upper landing surface, the side rails must extend at least how far above the landing?
- For a non-self-supporting (leaning) portable ladder, what is the proper setup angle?
- The top step or top cap of a stepladder should be used how?
- A portable ladder is found with a broken rung and a cracked side rail. The correct action is to:
- Lockout/tagout (LOTO) procedures are primarily intended to protect workers from:
Cập nhật gần nhất: · quy trình kiểm tra
Sen Lin, Người sáng lập PrepPass · Đối chiếu với California CSLB Contractor License Law & Business Exam · Quy trình kiểm tra
Người kiểm duyệt Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — kiểm tra)