Type III — Low-PressureCâu 180 / 240
The rupture disk on a low-pressure appliance should be:
a.Removed during recovery
b.Adjusted to a higher setting for leak testing
c.Replaced with a plug for service
d.Kept sound and never bypassed
Giải thích
The rupture disk is a critical safety device protecting the low-pressure shell and must be kept in good condition and never bypassed, plugged, or adjusted. Test pressure must stay below its typical 15 psig setting, which is why 10 psig is the leak-test limit. Tampering with it endangers the technician and the equipment.
Luyện miễn phí toàn bộ 240 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Low-pressure chillers most commonly use which type of compressor?
- If a low-pressure chiller's high-pressure limit control trips during operation, the technician should first:
- When recovering from a low-pressure chiller with a large charge, the most efficient practice is to:
- A device that automatically maintains the correct refrigerant level between the condenser and evaporator of a low-pressure chiller is the:
- HCFC-123 requires good ventilation during service primarily because it:
- Before opening a low-pressure chiller to replace a failed tube bundle, the technician must:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với EPA Section 608 Technician Certification Exam · Quy trình kiểm tra