Type III — Low-PressureCâu 177 / 240
Low-pressure chillers most commonly use which type of compressor?
a.Centrifugal
b.Reciprocating hermetic
c.Rotary vane
d.Scroll
Giải thích
Low-pressure chillers typically use centrifugal compressors, which move large volumes of low-pressure refrigerant vapor to cool commercial buildings. Reciprocating, rotary, and scroll compressors are more common in higher-pressure and smaller systems. Recognizing the centrifugal chiller helps identify Type III equipment.
Luyện miễn phí toàn bộ 240 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Non-condensable gases such as air that collect in a low-pressure chiller will:
- Compared with older designs, a high-efficiency purge unit is desirable because it:
- A technician wants to warm the refrigerant in a low-pressure chiller to speed recovery. Which method is acceptable?
- If a low-pressure chiller's high-pressure limit control trips during operation, the technician should first:
- When recovering from a low-pressure chiller with a large charge, the most efficient practice is to:
- The rupture disk on a low-pressure appliance should be:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với EPA Section 608 Technician Certification Exam · Quy trình kiểm tra