Core (Universal)Câu 22 / 240
A technician is disposing of a low-pressure chiller manufactured after November 15, 1993. Which evacuation level generally applies to low-pressure appliances during recovery?
a.0 inches Hg vacuum
b.25 mm Hg absolute (approximately 29 inches Hg vacuum)
c.10 inches Hg vacuum
d.4 inches Hg vacuum
Giải thích
Low-pressure appliances must be evacuated to a deep vacuum, expressed as 25 mm Hg absolute, which is roughly 29 inches of mercury vacuum, because these refrigerants boil off only at very low pressures. The 0, 4, and 10 inch Hg figures apply to various high-pressure appliances, not low-pressure chillers. Deep evacuation is required to remove as much low-pressure refrigerant as practical.
Trích dẫn luật: 40 CFR §82.156Luyện miễn phí toàn bộ 240 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- How long does an EPA Section 608 technician certification remain valid?
- A parts counter clerk is asked to sell a 25-pound cylinder of R-410A to a walk-in customer. Under Section 608 sales restrictions, the clerk may sell it only to someone who:
- A technician is recovering R-134a from a high-pressure appliance manufactured after November 15, 1993, that normally holds less than 200 pounds. To what level must the system be evacuated using recovery equipment?
- A technician recovers refrigerant from a household window air conditioner (a small appliance) whose compressor still runs. Recovery equipment made after November 15, 1993 must remove at least what percentage of the charge?
- What is 'system-dependent' (passive) recovery?
- The EPA program that reviews and lists acceptable substitute refrigerants for specific end uses is called:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với EPA Section 608 Technician Certification Exam · Quy trình kiểm tra