Recovery & RecyclingCâu 235 / 240
A refrigerant recovered from an appliance still contains oil, moisture, and acid. To make it usable again on-site, the technician would:
a.Reclaim it in a lab
b.Vent and replace it
c.Recycle it through an oil separator and filter-driers
d.Do nothing; it is ready to use
Giải thích
Recycling equipment with an oil separator and filter-driers reduces oil, moisture, and acidity so recovered refrigerant can be reused on-site with the same owner. Reclamation to AHRI 700 requires a certified reclaimer and is needed for resale. Venting is never allowed.
Luyện miễn phí toàn bộ 240 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Why is identifying the refrigerant before recovery especially important today?
- Which sequence correctly lists the three processes from least to most thorough?
- Storing a filled recovery cylinder in a hot vehicle trunk in summer is dangerous mainly because:
- Using recovery equipment made after November 15, 1993, an appliance using CFC-12 and holding less than 200 pounds must be evacuated to:
- The primary reason recovery cylinders are color-coded gray with a yellow top is to:
- Recovering refrigerant to the required evacuation level is required before a technician may:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với EPA Section 608 Technician Certification Exam · Quy trình kiểm tra