Services, Grounding & BondingCâu 47 / 120
A single ground rod does not have to be supplemented by a second electrode if its resistance to earth does not exceed what value?
a.5 ohms
b.25 ohms
c.100 ohms
d.1 ohm
Giải thích
A single rod, pipe or plate electrode must be supplemented unless it is shown to have a resistance to earth of 25 ohms or less. Values such as 5 ohms or 1 ohm come from specialized standards for communications and lightning systems, not from this general requirement, and 100 ohms is far too high.
Trích dẫn luật: 2023 NEC §250.53(A)(2)Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What is the secondary full-load current of a 75 kVA transformer with a 208Y/120-volt, three-phase secondary?
- What is the minimum length of a rod-type grounding electrode?
- Where two rod electrodes are installed to make up the grounding electrode system, what is the minimum spacing between them?
- A metal underground water pipe qualifies as a grounding electrode only if it is in direct contact with the earth for at least what length?
- A concrete-encased electrode may be formed by at least 20 feet of which of the following?
- When a metal underground water pipe is used as a grounding electrode, what else is required?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với Journeyman Electrician Licensing Exam (NEC-based) · Quy trình kiểm tra