Airspace & ChartsCâu 42 / 100
A remote pilot needs to fly inside Class D airspace tomorrow morning and wants the fastest lawful way to obtain approval. Which statement best describes the Low Altitude Authorization and Notification Capability (LAANC)?
a.It provides near real-time automated ATC authorization up to the UAS Facility Map grid ceilings
b.It files an instrument flight plan with ATC on behalf of the remote pilot in command
c.It grants an automatic waiver of the visual line of sight requirement found in §107.31
d.It publishes temporary flight restrictions and national security notices to remote pilots
Giải thích
LAANC is an automated system reached through FAA-approved UAS service suppliers that issues ATC authorization for controlled airspace within seconds when the request is at or below the published UAS Facility Map grid ceiling. It does not file flight plans, because Part 107 flights are conducted under visual rules and need none. Waivers of operating rules such as §107.31 come only from the FAA through the waiver process, and TFRs are distributed through the NOTAM system.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- On a sectional chart, a rural area is covered by a wide faded magenta shaded band, and no dashed or segmented lines cross the site. At what altitude does controlled Class E airspace begin over this location?
- While operating a small UAS at 300 ft AGL over an open field, the remote PIC and the visual observer see a crop-dusting airplane maneuvering toward the operating area at roughly the same altitude. What action is required?
- A remote pilot applicant is reviewing the vertical structure of the National Airspace System. Which statement correctly describes the vertical limits of Class A airspace?
- A remote pilot checks the UAS Facility Map for a job site inside Class C airspace and finds that the grid square covering the site is marked 0, while the neighboring squares show 100, 200, and 400. What does the 0 mean for this operation?
- Near a busy airport a sectional chart shows a solid magenta circle marking the outer shelf of Class C airspace, with a small boxed notation reading 45 above a line and 12 below it. How should a remote pilot interpret those two numbers?
- A sectional chart shows a towered airport ringed by a segmented blue line, with a boxed bracketed notation printed as 25 next to the ring. What does that notation tell the remote pilot?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với FAA Part 107 Remote Pilot Certificate Knowledge Test · Quy trình kiểm tra