Airspace & ChartsCâu 43 / 100
A remote pilot checks the UAS Facility Map for a job site inside Class C airspace and finds that the grid square covering the site is marked 0, while the neighboring squares show 100, 200, and 400. What does the 0 mean for this operation?
a.The site may be flown up to 400 ft AGL, since facility maps are advisory only
b.The site may be flown up to 100 ft AGL by matching the nearest adjacent grid value
c.No altitude is pre-approved there, so further coordination through FAA DroneZone is needed
d.The site is actually Class G airspace, so no authorization request is required at all
Giải thích
A grid ceiling of 0 means the FAA has pre-approved no altitude for automatic LAANC authorization in that square, so an automated request will be denied and the pilot must apply for further coordination through FAA DroneZone. Facility map values are not advisory suggestions; they are the ceilings ATC has agreed to approve automatically. A pilot may not borrow a neighboring square's value, and the presence of a facility map grid confirms the airspace is controlled, not Class G.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- While operating a small UAS at 300 ft AGL over an open field, the remote PIC and the visual observer see a crop-dusting airplane maneuvering toward the operating area at roughly the same altitude. What action is required?
- A remote pilot applicant is reviewing the vertical structure of the National Airspace System. Which statement correctly describes the vertical limits of Class A airspace?
- A remote pilot needs to fly inside Class D airspace tomorrow morning and wants the fastest lawful way to obtain approval. Which statement best describes the Low Altitude Authorization and Notification Capability (LAANC)?
- Near a busy airport a sectional chart shows a solid magenta circle marking the outer shelf of Class C airspace, with a small boxed notation reading 45 above a line and 12 below it. How should a remote pilot interpret those two numbers?
- A sectional chart shows a towered airport ringed by a segmented blue line, with a boxed bracketed notation printed as 25 next to the ring. What does that notation tell the remote pilot?
- A sectional shows a large airport surrounded by several solid blue rings of increasing radius, forming an upside-down wedding cake. The innermost ring is labeled 70 above SFC. A remote pilot wants to fly at 150 ft AGL from a rooftop inside that innermost ring. What applies?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với FAA Part 107 Remote Pilot Certificate Knowledge Test · Quy trình kiểm tra