SterilizationCâu 37 / 100
A mixed load contains wrapped metal basin sets and textile packs. How should the load be arranged?
a.Place metal and basin items on the lower shelves and textile packs on the upper shelves
b.Place textile packs on the bottom so metal weight does not crush them
c.Alternate metal and textile items on every shelf for even heat distribution
d.Place all items on a single shelf so the load remains compact
Giải thích
Condensate forms on and drips from metal items, so putting them low keeps that moisture off absorbent textile packs and prevents wet packs. Placing textiles beneath metal is the classic cause of soaked wrappers. Alternating or compacting the load restricts steam circulation and creates cold spots, and items should never be packed tightly against each other or the chamber walls.
Trích dẫn luật: AAMI ST79Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- After a tray fails its internal chemical indicator, the supervisor reviews the fundamentals with the team. Which four parameters must all be satisfied for steam sterilization to be effective?
- Why is saturated steam, rather than superheated or wet steam, required for steam sterilization?
- Peel pouches are being loaded onto a sterilizer shelf. What is the correct placement?
- A tray is removed from the sterilizer and the outer wrapper feels damp to the touch. What is the correct action?
- Wet packs are appearing intermittently across several loads. Which of the following is the least likely cause?
- After a steam cycle finishes and the load is removed, how should the load be handled?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với HSPA Certified Registered Central Service Technician (CRCST) Exam · Quy trình kiểm tra